Order Cart | Contact Us | Home | SIGs
Kits:

HPSDR Atlas Backplane

HPSDR - Atlas - the backplane

The Atlas is a passive backplane that all other modules plug into. The circuit board has provision for up to six DIN41612 connectors at 0.8 inch spacing. An ATX 20 pin power connector is fitted to the board so that 12v, 5v, 3.3v etc. supplies from a standard PC power supply can be used to power the HPSDR. Since such power supplies are in plentiful supply, both new and surplus, this neatly solves the power supply requirements. The DIN connector spacing and board size have been chosen such that the backplane can be fitted into a standard PC enclosure. Read more..


Parts Kit

TAPR is providing a kit of the parts needed to complete the backplane except for the PCB which must be ordered separately.

Parts included are:

    6 pcs 96 pin Eurocard Connector
    1 pc 20 pin Molex PSU connector
    5 pcs LED (color may vary depending on stock)
    30 pcs 0.1 mfd caps
    5 pcs 10 mfd tantulum cap
    1 pc 1.0K resistor
    2 pcs 1.8K resistor
    2 pcs 3.3K resistor

A more detailed BOM is in the Documentation


Ordering Information

The price for the HPSDR Atlas Parts Kit is:
  • $ 25 US for members of TAPR
  • $ 28 US for non-members
    + shipping/handling if applicable.
(Place Web Order)

Shipping and Handling

Shipping and Handling within the US will be by USPS unless otherwise requested by purchaser.

International Shoppers will be contacted by the TAPR office with a quote on the shipping costs to your country. TAPR uses Insured Air Mail, unless the purchaser requires something else.


Atlas Backplane PCB

The printed circuit board for the Atlas backplane.

Why are the parts kit and the PCB sold separately? Because there were 400 PCB out there already before TAPR's involvement, there were hundreds of people who wanted the parts without the PCB. Therefore the PCB is separate from the parts kit and you must order one of each to have a complete backplane unless you already have the PCB or you want to shop for the parts on your own.

If you had previously indicated interest in the second run of the PCB at http://www.hamsdr.org, you will still need to place your order here. The order will not be transferred automatically.

Ordering Information

The price for the Atlas PCB is:
  • $ 10 US for members of TAPR
  • $ 11 US for non-members
    + shipping/handling if applicable.
(Place Web Order)

Shipping and Handling

Shipping and Handling within the US will be by USPS unless otherwise requested by purchaser.

International Shoppers will be contacted by the TAPR office with a quote on the shipping costs to your country. TAPR uses Insured Air Mail, unless the purchaser requires something else.


Documentation


Other HPSDR kits

Janus ... Read more.
Ozymandias (Ozy) ... Read more.
Pinocchio ... Read more.
Penelope ... Read more.

About Us | Privacy Policy | Contact Us | ©2007 Tucson Amateur Packet Radio Corp.

Last Updated: February 10 2008